Heating cable, 8m, 15w/m, with thermostat
Heating cable 8 m - Smooth and flexible frost protection cable with automatic thermostat control
- Secure payment by card
- E-mail us, we reply swiftly!
- These rows can be edited \*
We believe in strong personal service. Do not hesitate to contact us with the slightest questions or concerns!
Description
Article no.: 7007238
This 8 meter long heating cable is designed for external installation in condensate drains. With its centrally located thermostat and robust construction, it provides safe frost protection down to -35 °C. The cable is easy to install thanks to the plug and rubber grommet.
Effective solution for drainage hoses and plastic pipes in exposed environments.
Effective solution for drainage hoses and plastic pipes in exposed environments.
- Cable type: Heating cable with integrated thermostat between hot and cold cable
- Hot cable, length: 1-15 meters (depending on model)
- Cold cable, length: 2 meters
- Power: 15 W/m, 230 V
- Thermostat, on: +2 °C
- Thermostat, off: +8 °C
- Max Deviation: +1.5 °C
- Cable diameter: Ø6 mm
- End sleeve: Ø8.1 mm
- Minimum bending radius: 25 mm
- Protection class: IPX7 (water protected)
- Approvals: CE, REACH
- Plug: Pre-assembled, earthed
- Rubber grommet: Yes, fitted
- Installation: For external installation in drain hose or plastic pipe for condensate drain
- Not for use in: Pressurized water systems
- Protection capability: 19 mm hose with 6 mm insulation to -35 °C25 mm hose with 6 mm insulation to -28 °C
- Hole drilling for cable: 8 mm hole at penetration